1. Little Cereal Trix Box

To setup the in your Asterisk machine is quite an easy job if you are using DIDforSale as your SIP provider. We will explain this process in step by step mode in the following manner: A) Creating the Trunks for Inbound service: Step 1: Login to your Asterisk PBX admin interface, go to Connectivity tab and click on Trunks and select the option of Add SIP Trunk and then give a name for the trunk as didforsale1 and add the trunk Parameter as shown below: host=209.216.2.211 type=peer context=from-trunk disallow=all allow=ulaw nat=yes canreinvite=yes insecure=very dtmfmode=rfc2833 qualify=yes Save and Apply the changes.

Set up the outbound route The last thing we need to set up for the SIP trunk is the outbound route. This will allow us to make outbound calls through the trunk. On the left menu, under Basic click Outbound Routes. We are now presented with the Add Route page. In the Route Name field, put a meaningful name. We'll put 'ToBroadvoice' in.

Step2: Create a second trunk for inbound with trunk name as didforsale2 and add the trunk Parameters as shown in below: type=peer nat=yes insecure=very host=209.216.15.70 dtmfmode=rfc2833 disallow=all context=from-trunk canreinvite=yes allow=ulaw Save and Apply the changes. Step 3: Create Inbound routes. For routing the inbound calls coming on your DID number, click on Inbound routes of your PBX interface and configure the DID with prefix 1.

Needs to be configured without 1. Say your DID is then you will configure the DID with 7 in the inbound routes.

It means that DID should be added with numbers only. No signs like ‘-‘are allowed in between the digits of DID number. Save and Apply the changes. 2) Creating the Trunks for Outbound Service: Step 1: Go to Connectivity and Click on Trunks and select the option Add SIP Trunk.

Little Cereal Trix Box

And then give a name for the trunk as didforsaleout and add the trunk Parameter shown below: type=peer nat=yes insecurevery host=209.216.2.212 dtmfmode=rfc2833 disallow=all context=from-trunk canreinvite=yes allow=ulaw Step 2: Create a second trunk in the same way with trunk name as didforsaleout2 with the below trunk parameters type=peer nat=yes insecure=very host=209.216.15.71 dtmfmode=rfc2833 disallow=all context=from-trunk canreinvite=yes allow=ulaw Step 3: Create Outbound Routes Click on Outbound Routes option of your PBX interface. In Dialed Number manipulation rules, put 1X. In Match pattern column for US and Canada calls. Select the both Outgoing trunks and Save and Apply the settings. If you have any questions or difficulty to setup the SIP trunks with our service, please feel free to write us at, our team will work with you closely to get the service up and running.